Datasheet4U Logo Datasheet4U.com

MAX5486 - Stereo Volume Control

General Description

The MAX5486 dual 40kΩ logarithmic taper volume control

Key Features

  • a debounced pushbutton up/down interface that controls volume and balance in audio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5480 8-Bit Parallel DAC in QSOP-16 Package Maxim
MAX548A 8-Bit Voltage-Output DACs Maxim
MAX5400 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23 Maxim
MAX5401 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23 Maxim
MAX5402 256-Tap / PoT / Low-Drift / Digital Potentiometer Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5481 10-Bit / Nonvolatile - Linear-Taper Digital Potentiometers
MAX5482 10-Bit / Nonvolatile - Linear-Taper Digital Potentiometers
MAX5483 10-Bit / Nonvolatile - Linear-Taper Digital Potentiometers
MAX5484 10-Bit / Nonvolatile - Linear-Taper Digital Potentiometers
MAX5487 Linear-Taper Digital Potentiometers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-0672; Rev 0; 11/06 Stereo Volume Control with Pushbutton Interface General Description The MAX5486 dual 40kΩ logarithmic taper volume control features a debounced pushbutton up/down interface that controls volume and balance in audio applications. Each potentiometer has 32 log-spaced tap points with a buffered wiper output to replace mechanical potentiometers. An integrated bias generator provides the required ((VDD + VSS) / 2) bias voltage, eliminating the need for costly external op-amp circuits in unipolar audio applications. A mode-indicator LED output indicates volume or balance control. Five integrated LED drivers indicate volume level or balance settings, depending on the status of the mode indicator.